CG-FXII Series wide format roll-based cutting plotters

The Mimaki CG-FXII Series of roll-based cutters are available in two widths. These models feature high speed, continuous crop mark detection for precise contour cutting. A proprietary half cut function leaves a small bit of backing sheet at connecting points for easier handling. An over cut function makes a cross cut at the start and end positions, resulting in sharp edges with no undercut fragments. These models are ideal for producing decals, stickers, cut-vinyl signs and more.

CG-FXII Series Go Beyond

  • Two sizes available:
    • CG-130FXII: 62 inches (158 cm)
    • CG-160FXII: 74 inches (188 cm)
  • High speed, continuous crop mark detection
  • Half cut function
  • Over cut function
  • Selectable clamp pressure
  • Three selectable job speeds
  • Media load from front or back
  • FineCut8 software included

Highlights of the Mimaki CG-FXII Series

The Mimaki CG-FXII Series roll-based cutting plotters include a number of features for producing a wide range of contour-cut pieces.

High-speed continuous crop mark detection <

An optical sensor enables automatic, consecutive detection of crop marks throughout the nested image, in combination with an automatic adjustment function for precise contour cutting.


Half cut mechanism

With the proprietary half cut function, the backing sheet can be cut leaving behind a small connecting point that can be easily detached when necessary. This enables easier handling when removing the contour cut piece from the sheet.


Over cut function

An over cut function makes a cross cut at the start and end positions, resulting in sharp edges with no undercut fragments.

What you can do with the Mimaki CG-FXII Series

  • Decals
  • Stickers
  • Cut-vinyl signage
  • Logos
  • Labels
  • Graphics
  • Signage
  • and more…

Technical overview of the Mimaki CG-FXII Series

Type Roll-based cutting plotter
Max media width CG-130FXII: 62 inches (158 cm)

CG-160FXII: 74 inches (188 cm)

Max cutting speed 39.3” (100 cm) per second
Max moving speed 55” (140 cm) per second
Max downforce pressure Cutter: 10-20g (2g step), 20-100g (5g step), 100-400g (10g step)

Pouncing: 10-20g (2g step), 20-100g (5g step), 100-400g (10g step)

Pen: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)

Max media thickness 0.01” (0.25 mm) for cutting
Operational environment Temp: 41˚ – 95˚ F (5˚ – 35˚ C)

35-75% RH (non-condensing)

Connectivity RS-232, USB
Power supply AC100V-240V, 50/60 Hz
Dimensions (W x D x H) CG-130FXII: 71.8 x 27.5 x 47.9” (183 x 70 x 122 cm)

CG-160FXII: 83.6 x 27.5 x 47.9” (213 x 70 x 122 cm)

Weight CG-130FXII: 132 lbs. (60 kg)

CG-160FXII: 152 lbs. (69 kg)

Consumables

Supplies for the Mimaki CG-FXII Series

Popular tools:

Swivel Blade For: Part Number
PVC Sheet SPB-0001
Small Letters SPB-0003
Rubber Sheet SPB-0005
Reflective Sheet SPB-0006
Fluorescent Sheet SPB-0007
PVC (low pressure) SPB-0030
Swivel Blade For: PVC Sheet Small Letters Rubber Sheet Reflective Sheet Fluorescent Sheet PVC (low pressure)
Part Number SPB-0001 SPB-0003 SPB-0005 SPB-0006 SPB-0007 SPB-0030